Schlüter-BEKOTEC-THERM-RRB is a room temperature control valve with bypass function for installation in the wall. It can be used for the room temperature control of a heating circuit without additional auxiliary energy (power). Prerequisite: The heating water supply temperature may not exceed 50°C.
The unit is installed in the wall at the beginning of a Schlüter-BEKOTEC-THERM floor heating circuit. The settings of the bypass valve allow for maintaining a consistent base temperature at the floor surface. This prevents the floor from cooling off completely, and the base temperature for areas used with bare feet can be reliably set.
Thanks to a thermostat button, the room temperature is adjustable from 7 to 28°C.
The scope of delivery includes:
- Wall installation box with adjustable installation depth
W x H x D = 135 x 190 x 57 mm
- Two attachment brackets
- Panel, white W x H = 145 x 210 mm, integrated room
temperature control with adjustment range from 7 to
28°C
- Brass RRB valve including venting and rinsing valve,
with valve connectors AG 3/4“ (DN20), matching the
clamp connections BTZ 2 KV
- Bypass valve for base volume flow
- Adjustment insert for overall volume flow
- Installation manual.
Note:
The connection to the Schlüter-BEKOTEC-THERM-BTHR heating pipes requires a set of clamp connections BTZ 2 KV. The connector fitting BTZ 2 AN or the angled connector fitting BTZ 2 AW can be used at the transition to the existing heating system (see page 15). Prior to installation, a qualified expert should inspect the control technology and hydraulic installations. The installation and assembly instructions of the manufacturer must be observed.
Maximum heating circuit lengths:
Heating pipe Ø 14 mm = 70 m
Heating pipe Ø 16 mm = 80 m.
Schlüter-BEKOTEC-THERM-RRB
